The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Support

Enabling Support for 2 Terabyte Drives or Larger for Intel® Desktop Boards


Last Reviewed: 23-Feb-2016
Article ID: 000007280

Unified Extended Firmware Interface (UEFI) must be enabled in BIOS if you plan to use a bootable hard drive that is 2 terabytes or larger. This is not a requirement for drives that will be used for storage purposes only.

To enable UEFI:

  1. Press F2 during startup to enter the BIOS setup.
  2. Go to the Boot menu.
  3. Set UEFI Boot to Enable.
  4. Press F10 to save and exit.

This article applies to: