The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Support

Ctrl+I Option to Open RAID Software Does Not Appear


Last Reviewed: 23-Feb-2016
Article ID: 000006808

When RAID is enabled in the BIOS, you see this RAID Option ROM command prompt during startup:

Press CTRL I to enter RAID Configuration Utility.

If the BIOS setting for Expansion Card Text is disabled and the <CTRL I> command prompt does not appear, try the following steps to resolve the issue.

  1. Press F2 during startup to enter the BIOS Setup.
  2. Go to the Boot menu.
  3. Set Expansion Card Text1 to Enabled.
  4. Press F10 to save and exit.

This option is called Addon ROM Display Mode on discontinued desktop boards.

This article applies to: