The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Support

Get Started with Intel® NUC Kit NUC5i5MYHE


Last Reviewed: 29-Aug-2016
Article ID: 000021821

Here's a checklist for you to get started using your Intel® NUC Kit NUC5i5MYHE. 

  • Follow the User Guide to begin using your Intel NUC.
  • Find compatible memory modules.
  • Find compatible peripherals (for example, drives, monitors, and hubs):
  • Download and install the latest BIOS version:
  • Install an operating system:
  • Install device drivers:
    • Use Intel® Download Center on a different computer to download and copy to a USB flash drive.
       
      Critical drivers
      • Chipset
      • Graphics
      • Wireless or Gigabit Ethernet (depending on how you connect)
      • Intel® Management Engine
      • USB 3.0—Required if you install Windows 7*
      Optional drivers
      • Bluetooth®—Required if you plan to use Bluetooth devices
      • Audio—Required if you plan to use the front panel audio jack
      • Infrared—Required if you plan to use an infrared remote control
      • Serial I/O—Required if you plan to use the I2C, SPI, UART, or GPIO host controllers
      • NFC (Near Field Communications)—Required if you plan to connect an NFC device to the board (not available on all revisions)

  • Read the regulatory documentation.
  • Learn about the Limited Warranty.

Related topic
Intel Support

This article applies to: