The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Support

Chassis Compatibility for the Intel® Server Board S2600CW Family


Last Reviewed: 18-Apr-2016
Article ID: 000007040

This page lists the tested chassis for the Intel® Server Board S2600CW Family and consists of two sections:

Tested Intel® Server Chassis list
Reference chassis list

Tested Intel® Server Chassis list

Intel® Server Chassis P4304XXMFEN2
  • An integrated Intel® Server Chassis P4000 pedestal chassis, rackable*
  • Standard control panel
  • Fixed 4 x 3.5 HDD support, no backplane, four HDD power connectors, one 4-port fan-out SATA cable
  • Ready for hot swap drive support
    • Sold separately: HS drive cage and front bezel with door
  • No CPU heatsinks
  • Two fixed 120-mm system fans
  • Fixed 550W PSU
  • Processor/memory air duct
  • Fixed bezel (FUPBEZELFIX2)
  • Fixed EMI cover
  • Spare hot swap EMI cover
  • Quick user guide
* Rails are not included.
Intel® Server Chassis P4304XXMUXX
  • An integrated Intel® Server Chassis P4000, pedestal chassis, rackable*
  • Standard control panel
  • Fixed 4 x 3.5 HDD support, no backplane, 4 HDD power connectors, fan-out SATA cable
  • Hot Swap bezel (FUPBEZELHSD2)
  • Fixed EMI cover
  • Spare half EMI shield, to be used if one HS drive cage is installed, in the accessory box
  • Ready for hot swap drive support
    • Sold separately: HS drive cage
  • No CPU heatsinks
  • Five redundant/hot swap 80-mm system fans
  • Processor/memory air duct
  • Quick user guide
  • Power supply required: 750W or 1600W
* Rails are not included.
 

Reference chassis list
The reference chassis list includes third-party chassis tested for the Intel® Server Board S2600CW Family. Chassis are tested to see if they provide adequate airflow to meet individual manufacturer temperature specifications.

Vendor Model Chassis type Power supply Unpackage shock test Thermal test level Driver support
Chenbro* RM13604T2-CW Rack H/S Pass with 25G 1 A
Chenbro* RM23612M2-R875CW Rack H/S Pass with 25G 1 A
Chenbro* RM31616E2-R875CW Rack H/S Pass with 25G 1 A
Chenbro* RM41824E2-R875CW Rack H/S Pass with 25G 1 A
Chenbro* SR112 Pedestal Single Pass with 25G 1 A
In-win* PV689 Pedestal Single Pass with 25G 1 A
In-win* PP689 Pedestal Single Pass with 25G 1 A
In-win* RS11002 Rack H/S Pass with 25G 3 A
In-win* RS212 Rack H/S Pass with 25G 1 A
CI-Design* NSR224 Rack H/S Pass with 25G 1 A
CI-Design* NSR316 Rack H/S Pass with 25G 1 A
AIC* RSC-2EH Rack H/S Pass with 25G 1 A
AIC* RSC-2ET Rack H/S Pass with 25G 1 A
AIC* RSC-3ET Rack H/S Pass with 25G 1 A
AIC* RSC-4EG Rack H/S Pass with 25G 2 A
Note Results are posted when new chassis are tested.

Power supply

  • H/S = Hot Swap Redundant
  • Single = Single power supply

Thermal test level

Thermal testing is done on Intel® Server Boards for all listed third-party reference chassis. The server board is configured to use a generic fan control scheme that runs all attached system fans at 100-percent pulse width modulation (PWM). The generic fan control scheme is set by selecting the OTHER CHASSIS option using the FRUSDR Configuration Utility.

Results are not guaranteed if the fan control PWM rate is reduced or changed from the tested configuration. If you change the PWM rate, you are responsible for all required thermal validation to make sure that the system configurations meet the maximum thermal limits.

The table lists the chassis configuration summary and the highest level of Intel thermal testing achieved.

Level Board revision Processor Maximum speed CPU TDP Manufacturing process technology Number of drives Ambient temperature
1 All Intel® Xeon® Processor E5-2600 Sequence 2.6 GHz 145W 22 nm 1 35 Celsius
2 All Intel® Xeon® Processor E5-2600 Sequence 2.6 GHz 145W 22 nm 1 30 Celsius