The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.

Support

What to Do when Unable to Enter BIOS Setup or Intel® RAID BIOS Console During Boot for Intel® Server Boards


Last Reviewed: 14-Mar-2016
Article ID: 000005999

If the Intel or OEM logo screen displays during POST, the BIOS entry or Intel® RAID BIOS console command prompts are not visible. To gain access to these prompts, you need to disable the logo screen.

Follow these steps to disable the Intel or OEM logo screen:

  1. Press F2 during boot, when the logo screen first displays.

  2. On the Main tab, change Quiet Boot from Enabled to Disabled.

  3. Go back to the top-level tabs and click the right arrow key until the Save & Exit tab displays.

  4. Select Save Changes and Exit to boot the system with the changes saved.

 

After your BIOS configuration is complete, to see the Intel or OEM logo screen again, reset the Quiet Boot selection to Enabled and save the changes.