The browser version you are using is not recommended for this site.
Please consider upgrading to the latest version of your browser by clicking one of the following links.


Rebuilding Degraded RAID Volume After Failed Drive Is Replaced

Last Reviewed: 05-Feb-2016
Article ID: 000005775

Follow these steps to rebuild a RAID volume after replacing a failed hard drive from a redundant RAID volume (RAID 1,5,10):

  1. Turn on the system.
  2. Click Start.
  3. Click All Programs.
  4. Click Intel.
  5. Click Intel® Rapid Storage Technology.
  6. Click Rebuild to another disk.
  7. Select the replacement hard drive and click Rebuild.

Additional instructions for performing a rebuild from the Option ROM are available in the User Guides.