The browser version you are using is not recommended for this site.Please consider upgrading to the latest version of your browser by clicking one of the following links.
We are sorry, This PDF is available in download format only
Introduction—ScopeThis document describes the external architecture (including device operation, pin descriptions, register definitions, and more) for the Intel® Ethernet Controller X540 (X540), a dual port 10GBASE-T Network Interface Controller.This document is intended as a reference for logical design group, architecture validation, firmware development, software device driver developers, board designers, test engineers, or anyone else who might need specific technical or programming information about the X540.Product OverviewThe Intel Ethernet Controller X540 is a derivative of the 82599, the Intel® 10 GbE Network Interface Controller (NIC) targeted for blade servers. Many features of its predecessor remain intact; however, some have been removed or modified as well as new features introduced.The Intel Ethernet Controller X540 includes two integrated 10GBASE-T copper Physical Layer Transceivers (PHYs). A standard MDIO interface, accessible to software via MAC control registers, is used to configure and monitor each PHY operation.Read the full Intel® Ethernet Controller X540: Datasheet.
Demonstrates pre-work, requirements, boot utility commands, and switch setup.
Intel® Ethernet Controller XL710 enables network virtualization for greater data center agility for scalability, multi-tenancy, and rapid service deployment.
Demos setup on Windows Server* 2008 R2 and Intel® Ethernet 10 Gigabit Converged Network Adapter.
Intel® Ethernet Controller XL710 supports flexible enterprise, cloud, and telecom data centers.
See how Intel® Ethernet FD correctly directs Ethernet packets to the right processor core.
Delivering flexibility for growing converged network demands with performance and virtualization.