Empower Your Prototype

The Intel® Galileo Gen 2 board is an Arduino*-compatible development platform that's perfect for makers who want to take their project to the next level.

Key features

  • Intel® Quark™ SoC X1000 application processor, a 32-bit, single-core, single-thread, Intel® Pentium® processor instruction set architecture (ISA)-compatible, operating at speeds up to 400 MHz.
  • Support for a wide range of industry standard I/O interfaces, including a full-sized mini-PCI Express* slot, 100 Mb Ethernet port, microSD* slot, USB host port, and USB client port.
  • 256 MB DDR3, 512 kb embedded SRAM, 8 MB NOR Flash, and 8 kb EEPROM standard on the board, plus support for microSD card up to 32 GB.
  • Hardware and pin compatibility with a wide range of Arduino Uno R3 shields.
  • Programmable through the Arduino integrated development environment (IDE) that is supported on Microsoft Windows*, Mac OS*, and Linux host operating systems.
  • Support for Yocto 1.4 Poky* Linux release.

Whats new with the Intel® Galileo Gen 2 board

  • 6-pin 3.3V USB TTL UART header replaces 3.5 mm jack RS-232 console port for Linux debug. New 6-pin connector mates with standard FTDI* USB serial cable (TTL-232R-3V3) and popular USB-to-Serial breakout boards. 12 GPIOs now fully native for greater speed and improved drive strength.
  • 12-bit pulse-width modulation (PWM) for more precise control of servos and smoother response.
  • Console UART1 can be redirected to Arduino headers in sketches, eliminating the need for soft-serial in many cases.
  • 12V power-over-Ethernet (PoE) capable (PoE module installation required).
  • Power regulation system changed to accept power supplies from 7V to 15V.

Related Videos