Thermal Design Guide: Intel® 875P Chipset
Intel® 875P Chipset: Thermal/Mechanical Design Guidelines For the Intel® 82875P Memory Controller Hub (MCH), April 2004
As the complexity of computer systems increases, so do the power dissipation requirements. Care must be taken to ensure that the additional power is properly dissipated. Typical methods to improve heat dissipation include selective use of ducting, and/or passive heatsinks.
The goals of this document are to:
• Outline the thermal and Mechanical operating limits and specifications for the Intel® 875P chipset memory controller hub (82875P MCH).
• Describe a reference thermal solution that meets the specification of the Intel 875P chipset memory controller hub (82875P MCH).
Properly designed thermal solutions provide adequate cooling to maintain the MCH die temperatures at or below thermal specifications. This is accomplished by providing a low local ambient temperature, ensuring adequate local airflow, and minimizing the die to local-ambient thermal resistance. By maintaining the MCH die temperature at or below the specified limits, a system designer can ensure the proper functionality, performance, and reliability of the chipset. Operation outside the functional limits can degrade system performance and may cause permanent changes in the operating characteristics of the component.
The simplest and most cost effective method to improve the inherent system cooling characteristics is through careful design and placement of fans, vents, and ducts. When additional cooling is required, component thermal solutions may be implemented in conjunction with system thermal solutions. The size of the fan or heatsink can be varied to balance size and space constraints with acoustic noise.
Read the full Thermal Design Guide Intel® 875P Chipset.