This list of chassis has been provided to Intel dealers as an aid in the system integration process. Intel has determined that the chassis meet MINIMUM electrical, thermal, mechanical fit and functional compatibility with the Intel® D865GLC desktop board and Intel Pentium® 4 processor operating at 3.0 GHz. These chassis were tested at an ambient room temperature of 35°C with the following peripherals installed:
- 2 Infineon* 256 MB PC3200 DDR400 memory modules
- Nvidia* Geforce* 4 8X AGP Video Graphics Card
- Seagate* 7200RPM SATA-100 Hard Disk Drive
- Teac* 3.5" Floppy Disk Drive
- Hewlett Packard* CD-R/RW/DVD Disk Drive
- 2 PCI Resistive Load Cards
Thermal evaluations for specific system configurations are considered the responsibility of the integrator and/or system OEM.
The following tests were performed on each chassis to ensure proper performance of the boxed Intel D865PERL using the Pentium 4 processor:
Mechaical Fit | Themal Performance |
Fan Operation | Included Accessories |
This is not an all inclusive testing regiment. Intel makes no claims of compliance with any governmental regulatory agency.
The thermally advantaged chassis listed below are those that provide 38°C or lower air inlet temperature to the processor fan heatsink when tested with the configuration described above.
Thermally Advantaged Tested Chassis List
The chassis listed below are those that provide 38°C or higher air inlet temperature to the processor fan heatsink when tested with the configuration described above.
Tested Chassis List
View the Tested Power Supply List.
View a source list of chassis that do not appear on this list and have not been tested by Intel.
Chassis model numbers may vary depending upon front bezel choice and other design characteristics. Check with your preferred chassis vendor or distributor to ensure Pentium 4 processor support.
If you are a chassis supplier and would like to be listed above and become part of the Intel chassis testing program download The Chassis Submission Guidelines [PDF 47KB]
IMPORTANT INFORMATION AND DISCLAIMERS
The content of the website links located in the tested chassis list is not controlled by Intel. These links are being offered for your convenience and should not be viewed as an endorsement by Intel of the content, products, or services offered there.
This listing is not intended to be all inclusive, nor is it an endorsement by Intel; it only represents chassis Intel has examined to date. Users of this list are reminded to check with the chassis manufacturer to get latest model specifications and ensure a particular chassis model is adequate for the user's intended purposes. This list is subject to change at any time. Check this web site regularly for updates.
For purposes of future motherboard introductions, Intel may test current and additional chassis, which may result in a revision of this chassis list. Intel reserves the right to modify this document at any time without notice. Intel assumes no responsibility for any errors which may appear in this document, nor does it make any commitment to update the information contained in it. Intel disclaims any liability or obligation for damages of any kind arising out of the application or use of the information contained in this document.
INTEL DISCLAIMS ALL WARRANTIES AND GUARANTEES, EXPRESS, IMPLIED OR OTHERWISE, ARISING FROM OR CONCERNING THE CONTENTS OF THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY OF NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF ANY THIRD PARTY. INTEL MAKES NO CLAIMS OF COMPLIANCE WITH ANY GOVERNMENTAL REGULATORY AGENCY.
Intel does not convey any license, express, implied or statutory, by estoppel or otherwise, arising under its intellectual property rights, nor under the rights of others. This information is for reference use by PC integrators only. PC integrators are not authorized to refer to Intel's testing or reporting activities in advertising or any other manner.

