Stocking Guidance for Intel® Server Chassis SC5650/SC5600/SC5600LX
For use with Intel® Server Board S5520HC
|
|
| AXX6DRV3GEXP | 877235 | 6-drive hot-swap, expander SATA/SAS backplane assembly cage kit for Intel® Server Chassis SC5600/SC5650
Requires 2 SAS ports from SAS personality module or RAID card and is compatible with SAS or SATA 3.5” hard drives Includes:
- Backplane board
- 6 drive carriers
- 2 Data cables
- 6-drive bay
- IPMB cable
- Common installation guide
- SATA/SAS configuration label
| 15% |
| AXX4DRV3GEXP | 877236 | 4-drive hot-swap expander, SATA/SAS backplane assembly cage kit for Intel® Server Chassis SC5650 family
Requires 2 SAS ports from SAS personality module or RAID card and is compatible with SAS or SATA 3.5” hard drives Includes:
- Backplane board
- 4 drive carriers
- 2 data cables
- 4-drive bay
- IPMB cable
- Common installation guide
- SATA/SAS configuration label
Note: Not supported in SC5600BASE, SC5650DP, SC5650BRP, or SC5650WS | 20% |
| AXX6DRV3GR | 900405 | 6-drive hot-swap non-expanded SATA/SAS backplane assembly cage kit for Intel® Server Chassis SC5600 / SC5650 family
Requires 6 SAS ports from RAID card for SAS (or SATA) 3.5” hard drive support or 6 SATA ports from baseboard or RAID card for SATA 3.5” hard drive support
Includes:
- Backplane board
- 6 drive carriers
- 6 data cables
- 6-drive bay
- IPMB cable
- SES cable
- SGPIO cable,
- Common installation guide
- SATA/SAS configuration label
| 25% |
| AXX4DRV3GR | 900404 | 4-drive hot-swap non-expanded, SATA/SAS backplane assembly cage kit for Intel® Server Chassis SC5600 family
Requires 4 SAS ports from RAID card for SAS (or SATA) 3.5” hard drive support or 4 SATA ports from baseboard or RAID card for SATA 3.5” hard drive support
Includes:
- Backplane board
- 4 drive carriers
- 4 data cables
- 4-drive bay
- IPMB cable
- SES cable
- SGPIO cable
- Common installation guide
- SATA/SAS configuration label
Note: Not supported with Intel® Server Chassis SC5600BASE, SC5650DP, SC5650BRP, or SC5650WS | 11% |
| FXXRGTHSINK | 901335 | Special tower heat sinks required for Intel® Server Chassis SC5600LX, 2 heat sinks in single package | 100% |
| ARIGRACK | 885459 | Pedestal to rack conversion kit for Intel® Server Chassis SC5600
Includes:
- Hinge cover
- Rack handles
- Intrusion switch jumper
- New rail kit assembly
- Rack hardware kit
- Icon label
- Installation guide
| 35% |
| AXXCMA3U7U | 870024 | Universal 3U though 7U Rack Mode Cable Management Arm (CMA)
Note: Requires ARIGRACK | 3% |
| FRIGTHSFANKIT | 901657 | Spare Intel® Server Chassis SC5600 hot swap fan kit
Includes 1 hot-swap 92mm fan and 1 hot-swap 120 mm fan | 1% |
| APPTHSDBKIT | 901181 | Hot-swap drive mounting Kit for Intel® Server Chassis SC5650
Includes 1 cooling fan, 1 fan holder and 2 Hot-swap cage brackets
Note: This mounting kit is required when using 6-bay Hot-swap Hard Disk Cage in SC5650 Chassis. This kit should be used with AXX6DRV3GR | 25% |
| APP3HSDBKIT | 882456 | Hot-swap drive mounting Kit for Intel® Server Chassis SC5650
Includes 1 cooling fan, 1 fan holder and 2 Hot-swap cage brackets
Note: This mounting kit is required when using 6-bay Hot-swap Hard Disk Cage in SC5650 Chassis. This kit should be used with AXX6DRV3GEXP | 15% |
| APP3RACKIT | 882457 | Rack conversion kit for Intel® Server Chassis SC5650 family
Includes rack rails and hardware for rack installation | 13% |
| AXX4FIXDB | 857882 | Cabled 4 drive tool-less drive bay assembly for Intel® Server Chassis SC5600
Includes hardware to mount 4 additional non-hot swap drives (for total of up to 10) | 2% |
| AXXRJ45DB92 | 881944 | Contains two serial cable converter dongles (RJ45 to DB9) one for DSD and one for DCD (modem)
The kit also includes one serial ribbon cable for cabling 2nd serial port from the baseboard
Note: Do not use the serial ribbon cable with Chassis SC5600/SC5650 | 3% |
| AXXFHDDBRK | 868171 | Bracket accessory for Intel® Server Chassis SC5600 family to install a 3.5” HDD (cabled) or a 3.5” USB floppy in a standard 5.25” drive bay
Note: Remove the bracket bezel for 3.5” HDD installation | 1% |
| ARIGDLTRAIL | 856600 | DLT Accessory Kit for Intel® Server Chassis SC5600 family Left and right rails (10 Pack)
Permits mounting a full height 5.25” peripheral (e.g. DLT tape drive) in two half height bays | 1% |
| AXXRAKSW5 | 878958 | Intel® RAID Activation Key AXXRAKSW5
to enable SAS and/or SATA Software RAID 5 | 6% |
| APPT600WHPSU | 900984 | 2nd Redundant 600W PSU for Intel® Server Chassis SC5650BRP to enable full, hot-swap power redundancy or use as spare | 65% |
| AXXRMM3 | 900961 | Intel® Remote Management Module 3 for Intel® Server Board S5520HC, S5500HCV, S5500BC, and Intel® Workstation Board S5520SC. | 5% |
| AXXLCPPED | 879579 | Intel® Local Control Panel (LCD) for SC5600 and SC5650 pedestal chassis. Fits in unused 5.25” peripheral bay. | 3% |
| AXX4SASMOD | 900946 | Intel® SAS Entry RAID Module AXX4SASMOD
Provides 4 port pass through SAS, entry-level RAID 0/1/1E, and optional host RAID 5
Includes:
- 1 AXX4SASMOD module card
- 3 snap standoffs
- 4 SAS/SATA cables
- Configuration Label
- Quick Installation Guide
| 5% |
| AXXROMBSASMR | 901641 | Intel® Integrated RAID Module SROMBSASMR provides 4 ports full featured SAS/SATA RAID 0, 1, 5, 6 and striping capability for spans 10, 50, 60. 128 MB cache
Up to 16 SAS/SATA HDDs with expander enclosures No PCI-E slot used Note: Optional backup battery AXXRSBBU3 should be ordered separately | 5% |
| AXXTIO | 901685 | I/O Shield for Intel® Server Boards S5520HC, S5500HCV, S5500BC, BB5500BC, BB5520HC, and BB5500HCV | 100% |
| | | | |
| Intel® RAID Controllers | | | |
| SRCSASJV | 892602 | Intel® RAID Controller SRCSASJV - PCIe x8, 8P SAS RAID Controller with Mux (ports can be configured as internal or external), ships with 512MB DIMM, supports up to 1GB ECC 7667MHz DDR2 mini-DIMM | 5% |
| SRCSATAWB | 892456 | Intel® RAID Controller SRCSATAWB - PCIe x4, 8 port SATA RAID Controller, 128MB embedded memory, 16 physical devices, >8 requires expander backplane | 7.5% |
| SRCSASBB8I | 896943 | Intel® RAID Controller SRCSASBB8I - PCIe x8, 8P SAS RAID Controller, 256MB embedded memory, MD2 Low Profile, half length form factor | 7.5% |
| SASUC8I | 900176 | Intel® RAID Controller SASUC8I - PCIe x8, 8P SAS Controller with entry-level HW RAID 0/1/1E/10E, low profile, half-length MD2 compliant form factor | 2.5% |
