- Home›
- Products›
- Server›
- Intel® RAID Controllers›
- SRCS28X›
- Specifications
Intel® RAID Controller SRCS28XSpecifications
Product specifications
| Hardware | |||
| Processor | Intel® IOP331 I/O processor operating at 250 MHz and with hardware XOR. | ||
|---|---|---|---|
| Memory | 128MB embedded ECC DDR SDRAM. | ||
| PCI Interface | PCI-X 133MHz or 100MHz, PCI 66MHz, or PCI 32-bit/33MHz; PCI 2.2 interface backward-compatible to 33MHz, with support for 3.3V. | ||
| Serial ATA | Eight SATA ports that support Serial ATA II extensions for hot-plug and enclosure management. | ||
| Form Factor | Full-height, half-length PCI: 6.9" x 4.2" (175 mm x 107 mm). | ||
| Status Indicators | Audible alarm, I2C connector (enclosure management) | ||
| Key RAID Features | |||
| RAID Levels Supported | 0, 1, 5, 10, and 50. | ||
| Reliability | Optional battery-backup unit for up to 72 hours of cache data retention. | ||
| Scalability | Online RAID-level migration and capacity expansion, without the need for reboot. | ||
| Configurability | Variable stripe size, variable cache options, drive coercion, array spanning, variable rebuild rate. | ||
| Availability | Auto hot-spare, auto rebuild, auto rebuild resume, drive roaming, controller migration, online capacity expansion, remote monitoring and management. | ||
| Operating System Support 1 | Microsoft* Windows Server* 2003 Enterprise Edition, Microsoft* Windows* 2000 Advanced Server, Novell* NetWare*, Red Hat* Enterprise Linux*, SCO* OpenServer*, SCO* UnixWare, SUSE* LINUX* Professional, SUSE* LINUX* Enterprise Server. | ||
| Power Requirements | |||
| DC Power Supply | 11W | ||
| +5 V | 0.85A maximum continuous current (with load-sharing enabled).
1.63A maximum continuous current (with load-sharing disabled). |
||
| +3.3 V | 1.20A maximum continuous current (with load-sharing enabled).
0.00A maximum continuous current (with load-sharing disabled). |
||
| Environmental | |||
| Ambient Temperature | Operating (dry bulb): 0C to 45C. | ||
| Relative Humidity | 20% to 80% non-condensing. | ||
| System Requirements | Intel®-based server or equivalent with PCI 2.2 compliant, PCI-X 133MHz, PCI-X 100MHz, PCI 64-bit/66MHz, or PCI 32-bit/33MHz slot. | ||
| Safety and EMC Regulatory Compliance (Class A)2
(EMC regulatory compliance is based on integration with a validated Intel® server board and configuration as outlined in the Intel® RAID Controller SRCU42E subassembly guide.). |
|||
| Country and District | Certification
(Safety and/or EMC) |
Regulatory Marks
(Safety and/or EMC) |
|
| Canada | CSA60950 / ICES-003 Class B | ETL / ICES | |
| Europe | European Directives | CE | |
| International | IEC60950 / CISPR 22 Class B | Not Applicable | |
| Japan | Not Applicable / Class B (Verification only) | VCCI | |
| Korea | Not applicable / RRL | MIC | |
| Taiwan | Not applicable / CNS 13438 Class B | BcontentI | |
| United States | UL60950 / FCC Class B | ETL / FCC | |
1 Operating-system support is contingent on the operating-system support of the motherboard in which the controller is installed.
2 EMC regulatory compliance is based on integration with a validated Intel server board and configuration as outlined in the Intel® RAID Controller SRCS28X subassembly guide.